Raison Automation

MAKE: ELECTRONET
MODEL: ELMAG 200
TX1-A1-B1-C1-D2-E1-F1-G1-HX-I1-FT400-J2-K3-L2-M2-N2-02-P1-Q4-R1—S1-U1
TRANSMITTER- TX1  : FIELD MOUNT WEATHER PROOF IP67
POWER SUPPLY-A1   : 90 – 250 V AC
MOC OF TRANSMITTER-B1 : ALUMINIUM DIE CAST
ELECTRICAL CONNECTION – C1: M20*1.5F
OUTPUT 1 – D2: 40-20 mA, HART
OUTPUT 2 – E1   : PULSE
ALARM / RELAY OUTPUT-F1 : 1* RELAY OUTPUT
COMMUNICATION 1– G1  : RS 485 MODBUS
COMMUNICATION 2– HX  : NIL
PROCESS PRESSURE-I1  : 10 KG
FLOW TUBE – FT000   : DN 000
ELECTRONICS LOCATION-J2 : REMOTE
REMOTE CABE LENGTH –K3  : 15 METER
FLOW TUBE PROTECTION CLASS - L2  : IP 68
PROCESS CONNECTION – M2 : FLANGED PN 10
MOC – FALNGE – N2  : CS
MOC – COIL HOUSING –O2    : SS304
LINNER   - P1 : NEROPRENE RUBBER / HARD RUBBER
FLANGE RATING – Q4   : PN 10
MOC FLOW TUBE – R1 : SS304
ELECTRODE – S1 : SS 316 L
ONLINE PRESSURE SENSOR- U1 : 10 KG
ACCURACY         : < ± 0.5% of M.V. + (± 5mm /sec) for Velocity Range 0.3 m/s to  12m/s
Display  : LCD Display - 6 Digit for Flow Rate & 8 Digit for Totalizer Flow

Electromagnetic Flow Meters are based on FARADAY'S LAW OF INDUCTION. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. The meter features flanged construction and is available with choice of liner and electrode material. All meters consist of a sensor and a converter that may be mounted integral to the sensor or remotely either with a field mount kit.

These meters are also called as Magflow or Electromagnetic Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like Juices, Milk, Municipal or Industrial Water etc. These meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc.

Electronet series ELMAG® - 100 are micro-controller based insertion type electromagnetic flow meters specially used for various industrial applications. These flow meters accurately measure the flow rate of conductive liquids & slurries in closed pipes. Due to its simple & rigid design, the flow meter is an obstruction-less & maintenance-free instrument in place of conventional mechanical flow measuring devices

The use of Pulsed DC technology offers highest ability & better measuring accuracy in the form of electrical signal 4-20mA DC linearly proportional to volumetric flow. The instrument is based on Faradays law of electro-magnetic induction. A magnetic field is generated by the instrument in the flow tube. The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity. Corresponding electrical output is provided with respect to measuring flow range. This meter is available in Hot Retractable and Fixed Insertion type

Electromagnetic Flow Meters are based on FARADAY'S LAW OF INDUCTION. A magnetic field is applied to the metering tube, which results in a potential difference proportional to the flow velocity perpendicular to the flux lines. The physical principle at work is electromagnetic induction. The meter features flanged construction and is available with choice of liner and electrode material. All meters consist of a sensor and a converter that may be mounted integral to the sensor or remotely either with a field mount kit.

These meters are also called as Magflow or Electromagnetic Flow Meters. These meters has no any moving parts in it, so these very well recommended for food grade applications like Juices, Milk, Municipal or Industrial Water etc. These meters are also suitable for liquids were there are lot of suspended particles like Sewage, Waste Water, Chemicals, Slurries etc.

Electronet series ELMAG® - TX22 are micro-controller based two wire full bore type electromagnetic flow transmitters specially used for various industrial applications.

These flow transmitters accurately measure the flow rate of conductive liquids and slurries in closed pipes. Due to its simple and rigid design, the flow transmitter is an obstruction-less and maintenance-free instrument in place of conventional mechanical flow measuring device.

The use of 'Pulsed DC' technology offers highest ability and better measuring accuracy in the form of electrical signal 4-20 mA DC linearly proportional to volumetric flow, The instrument is based on Faraday's law of electromagnetic induction. A magnetic field is generated by the instrument in the flow tube.

The fluid flowing through this magnetic field generates a voltage that is proportional to the flow velocity and corresponding electrical output is provided with respect to ensuring voltage.

Electronet Flowmeters are calibrated at our own Water Flow Calibration Facility. It uses the primary method of measuring the water flow by gravimetric principle. The facility is designed for calibration of flowmeters under controlled and stable flow conditions.